Aironet, Access Points, Client Adapters and software, Mobile and Outdoor Wireless, Antennas.
kamarale
Member
Posts:
140
Joined:
Tue Mar 15, 2011 8:07 am
Certs:
CCNA

ALL APs on channel 1

Tue Apr 05, 2016 3:54 pm

Hello,

Im having the following issue:

I have a WLC 2504 with 8.1 version and 25 APs controlled (1702i).
They are all in Bridge mode, 22 are RAPs and 3 are MAPs with no eth connection (dont know if it is relevant)
Eveything works ok, but the thinf is that ALL the APs in the 2,4Ghz radio are on channel 1.

DCA is enabled and individually every AP 2.4 radio is controlled globally.

Why aren´t they using channel 1 , 6 and 11 ? which would be the correct thing to do.

I attach print screens of the config.

Thanks in advance.
Regards.
Attachments
AP-channel-1.png
AP-channel-1.png (110.64 KiB) Viewed 6506 times
dca-global.png
dca-global.png (96.69 KiB) Viewed 6506 times
dca.png
dca.png (70.59 KiB) Viewed 6506 times

kamarale
Member
Posts:
140
Joined:
Tue Mar 15, 2011 8:07 am
Certs:
CCNA

Re: ALL APs on channel 1

Tue Apr 12, 2016 1:15 pm

Nobody ???

shantia
New Member
Posts:
4
Joined:
Mon Apr 18, 2016 3:54 am
Certs:
MCSE

Re: ALL APs on channel 1

Mon Apr 18, 2016 4:11 am

Hi
First ,check your country code.
Then,Try to use 2,7,12 channels and see if any changes


Return to Cisco Wireless

Who is online

Users browsing this forum: No registered users and 13 guests