Cisco Works, SNMP, MIBs.
night-fury
New Member
Posts:
2
Joined:
Thu Aug 13, 2015 2:20 am
Certs:
ccna

snmp on a router port

Fri May 13, 2016 8:27 am

Hi guys,

I have a routed port on our core switch and we are using that port to connect to another branch of ours through a point to point link. Here's the config. Its a 3850 switch.

interface GigabitEthernet0/13
no switchport
ip address 6.6.6.5 255.255.255.0
end

I want to monitor the link bandwidth with snmp and other parameters if feasible. Is it possible to setup such traps? or any other monitoring configuration that can be done on it?

-best
nf

Return to Cisco Network Management

Who is online

Users browsing this forum: No registered users and 18 guests