VoIP, Cisco Unity, Cisco Call Manager, MeetingPlace, IP Phones, AS5350, AS5400.
CChamblee25
New Member
Posts:
2
Joined:
Tue Jan 26, 2016 10:47 pm
Certs:
Avaya ACSS, A+, Network+, Security+

Configuring VIC2-4FXO in a 3825 Router

Wed Jan 27, 2016 11:07 am

Hello all. I'm an Avaya guy, but I'm trying to configure a small CME Voice Lab in preparation for studying for my CCNA. I have a 3825 router, 3560 PoE switch, two 7960 VoIP phones, a dual T1/E1 WIC, and a VIC2-4FXO FXO card. I have the system up and running with the two VoIP phones, now I'm trying to add CO POTS line capabilities with the FXO card. With the card physically installed, I can see it in the system when I do a "show inventory". But I can't access the FXO ports in configuration, for some reason. Here's some info on my system:

CME#show ver
Cisco IOS Software, 3800 Software (C3825-ADVENTERPRISEK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 17:25 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

CME uptime is 24 minutes
System returned to ROM by power-on
System image file is "flash:c3825-adventerprisek9-mz.151-4.M5.bin"
Last reload type: Normal Reload


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 3825 (revision 1.2) with 486400K/37888K bytes of memory.
Processor board ID FTX1224A105
2 Gigabit Ethernet interfaces
2 Channelized (E1 or T1)/PRI ports
1 Virtual Private Network (VPN) Module
1 Subrate T3/E3 port
4 Voice FXO interfaces
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
255488K bytes of ATA System CompactFlash (Read/Write)


License Info:

License UDI:

-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO3825 FTX122*****



Configuration register is 0x2102

CME#

============================

CME#show diag 0
Slot 0:
C3825 Mother board 1GE(TX,SFP),1GE(TX), integrated VPN and 4W Port adapter, 11 ports
Port adapter is analyzed
Port adapter insertion time 00:25:47 ago
Onboard VPN : FW ver01100200
EEPROM contents at hardware discovery:
PCB Serial Number : FOC12184LJU
Hardware Revision : 1.2
Top Assy. Part Number : 800-23087-04
Board Revision : B0
Deviation Number : 0
Fab Version : 07
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 61
Hardware date code : 20080506
Chassis Serial Number : FTX1224A105
Chassis MAC Address : 0021.55e6.b620
MAC Address block size : 32
CLEI Code : IPMEY10BRA
Product (FRU) Number : CISCO3825
Part Number : 73-4021-09
Version Identifier : V04
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 32 31 38 34 4C 4A 55 40
0x10: 04 2A 41 01 02 C0 46 03 20 00 5A 2F 04 42 42 30
0x20: 88 00 00 00 00 02 07 03 00 81 00 00 00 00 04 00
0x30: 09 61 83 01 32 67 7A C2 8B 46 54 58 31 32 32 34
0x40: 41 31 30 35 C3 06 00 21 55 E6 B6 20 43 00 20 C6
0x50: 8A 49 50 4D 45 59 31 30 42 52 41 CB 89 43 49 53
0x60: 43 4F 33 38 32 35 82 49 0F B5 09 89 56 30 34 20
0x70: D9 02 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 0:
2nd generation - FXO Voice daughter card (4 port)
Hardware Revision : 5.0
Top Assy. Part Number : 800-33585-01
Board Revision : C0
Deviation Number : 0-0
Fab Version : 04
PCB Serial Number : FOC15143XG0
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : VIC2-4FXO
Version Identifier : V04
CLEI Code : CNUIAXJAAC
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 4C 41 05 00 C0 46 03 20 00 83 31 01
0x10: 42 43 30 80 00 00 00 00 02 04 C1 8B 46 4F 43 31
0x20: 35 31 34 33 58 47 30 03 00 81 00 00 00 00 04 00
0x30: CB 89 56 49 43 32 2D 34 46 58 4F 89 56 30 34 20
0x40: C6 8A 43 4E 55 49 41 58 4A 41 41 43 FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 1:
VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1
Hardware Revision : 0.0
Top Assy. Part Number : 800-22629-05
Board Revision : B0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC12333RP8
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : VWIC2-2MFT-T1/E1
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 FC 41 00 00 C0 46 03 20 00 58 65 05
0x10: 42 42 30 88 00 00 00 00 02 04 C1 8B 46 4F 43 31
0x20: 32 33 33 33 52 50 38 03 00 81 00 00 00 00 04 00
0x30: CB 90 56 57 49 43 32 2D 32 4D 46 54 2D 54 31 2F
0x40: 45 31 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF



CME#

============================

CME#show telephony-service
CONFIG (Version=8.6)
=====================
Version 8.6
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/ ... _home.html

protocol mode default
ip source-address 172.16.1.1 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
load 7912 term06.default.loads
load 7960-7940 P00308010200
load 7941 term41.default
load 7942 term42.default
load 7945 term45.default
load 7961 term61.default
load 7962 term62.default
load 7965 term65.default
load 7970 term70.default
load 7971 term71.default
load 7975 term75.default
max-ephones 30
max-dn 45
max-conferences 4 gain -6
dspfarm units 0
dspfarm transcode sessions 0
conference software
privacy
no privacy-on-hold
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 10
cnf-file location: flash:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
time-format 12
date-format mm-dd-yy
timezone 0 Greenwich Standard Time
secondary-dialtone 9
no transfer-pattern is configured, transfer is restricted to local SCCP phones only.
keepalive 30 auxiliary 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
system message B5298 Voice Lab
web admin system name cisco password cisco
web admin customer name Customer
edit DN through Web: enabled.
edit TIME through web: enabled.
background save interval 10 minutes
Log (table parameters):
max-size: 150
retain-timer: 15
create cnf-files version-stamp 7960
transfer-system full-consult
transfer-digit-collect new-call
auto assign 1 to 10 type 7912
auto assign 1 to 10 type 7941
auto assign 1 to 10 type 7940
auto assign 1 to 10 type 7960
auto assign 1 to 10 type 7961
auto assign 1 to 10 type 7965
auto assign 1 to 10 type 7945
auto assign 1 to 10 type 7942
auto assign 1 to 10 type 7962
auto assign 1 to 10 type 7970
auto assign 1 to 10 type 7971
auto assign 1 to 10 type 7975
local directory service: enabled.
Extension-assigner tag-type ephone-tag.

CME#

==========================

CME#show voice port summary
IN OUT
PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC
=============== == ============ ===== ==== ======== ======== ==
50/0/1 1 efxs up dorm on-hook idle y
50/0/1 2 efxs up dorm on-hook idle y
50/0/2 1 efxs up dorm on-hook idle y
50/0/2 2 efxs up dorm on-hook idle y
50/0/3 1 efxs up up on-hook idle y
50/0/3 2 efxs up up on-hook idle y
50/0/4 1 efxs up up on-hook idle y
50/0/4 2 efxs up up on-hook idle y
50/0/5 1 efxs up up on-hook idle y
50/0/5 2 efxs up up on-hook idle y
50/0/6 1 efxs up up on-hook idle y
50/0/6 2 efxs up up on-hook idle y
50/0/7 1 efxs up up on-hook idle y
50/0/7 2 efxs up up on-hook idle y
50/0/8 1 efxs up up on-hook idle y
50/0/8 2 efxs up up on-hook idle y
50/0/9 1 efxs up up on-hook idle y
50/0/9 2 efxs up up on-hook idle y
50/0/10 1 efxs up up on-hook idle y
50/0/10 2 efxs up up on-hook idle y
50/0/11 1 efxs up up on-hook idle y
50/0/11 2 efxs up up on-hook idle y
50/0/12 1 efxs up up on-hook idle y
50/0/12 2 efxs up up on-hook idle y
50/0/13 1 efxs up up on-hook idle y
50/0/13 2 efxs up up on-hook idle y
50/0/14 1 efxs up up on-hook idle y
50/0/14 2 efxs up up on-hook idle y
50/0/15 1 efxs up up on-hook idle y
50/0/15 2 efxs up up on-hook idle y
50/0/16 1 efxs up up on-hook idle y
50/0/16 2 efxs up up on-hook idle y
50/0/17 1 efxs up up on-hook idle y
50/0/17 2 efxs up up on-hook idle y
50/0/18 1 efxs up up on-hook idle y
50/0/18 2 efxs up up on-hook idle y
50/0/19 1 efxs up up on-hook idle y
50/0/19 2 efxs up up on-hook idle y
50/0/20 1 efxs up up on-hook idle y
50/0/20 2 efxs up up on-hook idle y
50/0/21 1 efxs up up on-hook idle y
50/0/21 2 efxs up up on-hook idle y
50/0/22 1 efxs up up on-hook idle y
50/0/22 2 efxs up up on-hook idle y
50/0/23 1 efxs up up on-hook idle y
50/0/23 2 efxs up up on-hook idle y
50/0/24 1 efxs up up on-hook idle y
50/0/24 2 efxs up up on-hook idle y
50/0/25 1 efxs up up on-hook idle y
50/0/25 2 efxs up up on-hook idle y
50/0/26 1 efxs up up on-hook idle y
50/0/26 2 efxs up up on-hook idle y
50/0/27 1 efxs up up on-hook idle y
50/0/27 2 efxs up up on-hook idle y
50/0/28 1 efxs up up on-hook idle y
50/0/28 2 efxs up up on-hook idle y
50/0/29 1 efxs up up on-hook idle y
50/0/29 2 efxs up up on-hook idle y
50/0/30 1 efxs up up on-hook idle y
50/0/30 2 efxs up up on-hook idle y
50/0/31 1 efxs up up on-hook idle y

PWR FAILOVER PORT PSTN FAILOVER PORT
================= ==================

CME#

==============================

So, when I try to access the FXO card, I can't seem to find it. Here's a capture of the attempt:

CME#config t
Enter configuration commands, one per line. End with CNTL/Z.
CME(config)#voice-port ?
<50-50> Voice interface slot #

CME(config)#voice-port 50?
/

CME(config)#voice-port 50/?
<0-0> Voice interface SubUnit #

CME(config)#voice-port 50/0?
/

CME(config)#voice-port 50/0/?
<1-31> Voice interface port # within vic

CME(config)#voice-port 50/0/1
^
% Invalid input detected at '^' marker.

CME(config)#

Am I going about this wrong?

CChamblee25
New Member
Posts:
2
Joined:
Tue Jan 26, 2016 10:47 pm
Certs:
Avaya ACSS, A+, Network+, Security+

Re: Configuring VIC2-4FXO in a 3825 Router

Wed Jan 27, 2016 3:35 pm

Disregard... the problem is that I don't have any DSP resources for the analog cards. Had to buy a NM-HD-2V network module with on-board DSP resources.


Return to Cisco Voice and Video

Who is online

Users browsing this forum: No registered users and 11 guests